Midspan & MidspanUPS™ indoor SecurePoE

Indoor SecurePoE units are supplied in wall-mountable mild steel enclosures.

DA1000-IN

The DA1000-IN Midspan PoE injector is ideal for indoor environments where up to four devices require up to 30W each of PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

Gigabit and 10/100Mbs versions are available.

DA1001-IN

The DA1001-IN MidspanUPS PoE injector is ideal for indoor environments where up to four devices require up to 30W each of reliable, battery-backed, PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

The 1.2Ah back-up battery is ideal for preventing devices from re-booting during minor mains power faults and fluctuations.

Gigabit and 10/100Mbs versions are available.

View product page

DA1007-IN

The DA1007-IN MidspanUPS PoE injector is ideal for indoor environments where up to four devices require up to 30W each of reliable, battery-backed, PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

Maintain 7Ah of PoE power to devices such as VoIP telephony and intercoms during mains power faults and failures.

Gigabit and 10/100Mbs versions are available.

View product page

DA1010-IN

The DA1010-IN MidspanUPS PoE injector is ideal for indoor environments where up to four devices require up to 30W each of reliable, battery-backed, PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

These larger units maintain 10Ah of PoE power to devices during long power interruptions and major faults. The 10Ah stand-by battery pack will maintain a 20W load for approximately 20 hours or small 5W devices for up to 100 hours after a power failure.

Gigabit and 10/100Mbs versions are available.

View product page

Multispan & MultispanUPS™ indoor SecurePoE

Indoor SecurePoE units are supplied in wall-mountable mild steel enclosures.

DA1100-IN

The DA1100-IN Multispan PoE injector is ideal for indoor environments where up to four devices require up to 30W each of PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

All SecurePoE Multispan models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to all ports with a single or dual Ethernet connections from the SecurePoE unit to existing network infrastructure.

Gigabit and 10/100Mbs versions are available.

All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.

View product page

DA1101-IN

The DA1101-IN MultispanUPS PoE injector is ideal for indoor environments where up to four devices require up to 30W each of reliable, battery-backed, PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

All SecurePoE MultispanUPS models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to all ports with a single or dual Ethernet connection from the SecurePoE unit to existing network infrastructure.

The 1.2Ah back-up battery is ideal for preventing devices from re-booting during minor mains power faults and fluctuations.

Gigabit and 10/100Mbs versions are available.

All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.

View product page

DA1107-IN

The DA1107-IN MultispanUPS PoE injector is ideal for indoor environments where up to four devices require up to 30W each of reliable, battery-backed, PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

All SecurePoE MultispanUPS models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to all ports with a single or dual Ethernet connection from the SecurePoE unit to existing network infrastructure.

Maintain 7Ah of PoE power to devices such as VoIP telephony and intercoms during mains power faults and failures.

Gigabit and 10/100Mbs versions are available.

All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.

View product page

DA1110-IN

The DA1110-IN MultispanUPS PoE injector is ideal for indoor environments where up to four devices require up to 30W each of reliable, battery-backed, PoE power. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

All SecurePoE MultispanUPS models have an integrated 5-port Gigabit network switch. This allows all the PoE through-port channels to be bridged, allowing data connections to all ports with a single or dual Ethernet connection from the SecurePoE unit to existing network infrastructure.

These larger units maintain 10Ah of PoE power to devices during long power interruptions and major faults. The 10Ah stand-by battery pack will maintain a 20W load for approximately 20 hours or small 5W devices for up to 100 hours after a power failure.

Gigabit and 10/100Mbs versions are available.

All Multispan models include 200mm Ethernet patch cables between the PoE injector ports and the integrated 5-port network switch.

View product page

Quick look-up guide

Available as a free-of-charge PDF download (Click here to download) or hard copy, the quick look-up guides cover Dantech’s extensive range of PoE power supplies, indicating key product features and bullet-pointed benefits.