SecurePoE: DA1001-EX

Ordering information

Product code	Description
DA1001-EX-1	Exterior midspanUPS 1.2Ah 1 x 30W PoE+ injector
DA1001-EX-2	Exterior midspanUPS 1.2Ah 2 x 30W PoE+ injector
DA1001-EX-4	Exterior midspanUPS 1.2Ah 4 x 30W PoE+ injector
DA1001-EX-1-G	Exterior midspanUPS 1.2Ah 1 x 30W Gigabit PoE+ injector
DA1001-EX-2-G	Exterior midspanUPS 1.2Ah 2 x 30W Gigabit PoE+ injector
DA1001-EX-4-G	Exterior midspanUPS 1.2Ah 4 x 30W Gigabit PoE+ injector
Where to buy

Exterior 1.2Ah MidspanUPS™

Customised Yuasa battery pack included
Battery packs are fast-fit and replaceable
Automatic battery low voltage deep discharge protection
Mains fail and low battery relay monitoring contacts
Guaranteed replacement battery pack availability

MidspanUPS 1.2Ah power injector with 1, 2 or 4 load output ports
30W of load power availability per port, to IEEE 802.3:2012
90-270V AC, 47-63Hz universal mains input
Ultra high efficiency operation - up to 96%
System power status LED & monitoring contacts
Individual port power status LEDs and monitoring contacts
Monitoring relay contacts can be used for analogue or network interface
Innovative fast entry cable system
Secure weather resistant enclosure
Lid tamper switch
Automatic load class detection
Designed for ease of fitting and high reliability

DA1001-EX

The DA1001-EX midspanUPS 1.2Ah PoE injector is ideal for harsh outdoor environments where up to four devices require PoE power up to 30W each. With one, two or four through-port models available, you can connect devices to be powered with or without a data connection.

One, two or four output versions are available. Each output has an RJ45 data port,(e.g. from the network switch) and an RJ45 load port for the PoE device, that outputs the data and power.

Outputs have LED indication to show if a compatible device is connected and powered. In addition there are SPCO clean contacts for monitoring the power status of each output. The unit also has power on LED indication and SPCO clean contacts to signal power failure.

Estimated stand-by times

Output load	Battery capacity
	1.2Ah	7Ah	10Ah
5W	9 Hours	65 Hours	100 Hours
12W	4 Hours	30 Hours	44 Hours
25W	1.75 Hours	14.5 Hours	20 Hours
50W	40 Minutes	6.5 Hours	9.5 Hours
75W	23 Minutes	4 Hours	6 Hours
100W	14 Minutes	2.75 Hours	4 Hours

Where to buy

SecurePoE is available from all good stockists. A selection of some of the approved distributors is listed here.