The DA1001-RM is just 1U in height. This 1.2Ah MidspanUPS PoE injector is ideal for rack-mounting where up to eight devices require up to 30W each of PoE power. With four or eight through-port models available, you can connect devices to be powered with or without a data connection.
Four or eight output versions are available. Each output has an RJ45 data port,(e.g. from the network switch) and an RJ45 load port for the PoE device, that outputs the data and power.
Outputs have LED indication to show if a compatible device is connected and powered. In addition there are SPCO clean contacts for monitoring the power status of each output. The unit also has power on LED indication and SPCO clean contacts to signal power failure.
Estimated stand-by times
Designed for reliable battery backup of PoE devices, our SecurePoE™ range includes battery maintained MidspanUPS and MultispanUPS models that provide continuous power to PoE ports when mains power is not available. The MultispanUPS models maintain power to both the SecurePoE unit and the included Cisco network switch.
Power backup is provided by our replaceable customised battery packs, which use high reliability Yuasa batteries. Different capacities are available to cater for different standby time requirements and we offer guaranteed replacement battery pack availability.
Whether powering CCTV cameras, video intercoms, locks or other device types, Power over Ethernet battery standby is available off-the-shelf.
|Output load||Battery capacity|
|5W||9 Hours||65 Hours||100 Hours|
|12W||4 Hours||30 Hours||44 Hours|
|25W||1.75 Hours||14.5 Hours||20 Hours|
|50W||40 Minutes||6.5 Hours||9.5 Hours|
|75W||23 Minutes||4 Hours||6 Hours|
|100W||14 Minutes||2.75 Hours||4 Hours|